wifi-he-network.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2016 SEBASTIEN DERONNE
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Sebastien Deronne <sebastien.deronne@gmail.com>
 */
 
#include "ns3/boolean.h"
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/double.h"
#include "ns3/enum.h"
#include "ns3/he-phy.h"
#include "ns3/internet-stack-helper.h"
#include "ns3/ipv4-address-helper.h"
#include "ns3/ipv4-global-routing-helper.h"
#include "ns3/log.h"
#include "ns3/mobility-helper.h"
#include "ns3/multi-model-spectrum-channel.h"
#include "ns3/on-off-helper.h"
#include "ns3/packet-sink-helper.h"
#include "ns3/packet-sink.h"
#include "ns3/rng-seed-manager.h"
#include "ns3/spectrum-wifi-helper.h"
#include "ns3/ssid.h"
#include "ns3/string.h"
#include "ns3/udp-client-server-helper.h"
#include "ns3/uinteger.h"
#include "ns3/wifi-acknowledgment.h"
#include "ns3/yans-wifi-channel.h"
#include "ns3/yans-wifi-helper.h"
 
#include <functional>
 
// This is a simple example in order to show how to configure an IEEE 802.11ax Wi-Fi network.
//
// It outputs the UDP or TCP goodput for every HE MCS value, which depends on the MCS value (0 to
// 11), the channel width (20, 40, 80 or 160 MHz) and the guard interval (800ns, 1600ns or 3200ns).
// The PHY bitrate is constant over all the simulation run. The user can also specify the distance
// between the access point and the station: the larger the distance the smaller the goodput.
//
// The simulation assumes a configurable number of stations in an infrastructure network:
//
//  STA     AP
//    *     *
//    |     |
//   n1     n2
//
// Packets in this simulation belong to BestEffort Access Class (AC_BE).
// By selecting an acknowledgment sequence for DL MU PPDUs, it is possible to aggregate a
// Round Robin scheduler to the AP, so that DL MU PPDUs are sent by the AP via DL OFDMA.
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("he-wifi-network");
 
int
main(int argc, char* argv[])
{
    bool udp{true};
    bool downlink{true};
    bool useRts{false};
    bool useExtendedBlockAck{false};
    double simulationTime{10}; // seconds
    double distance{1.0};      // meters
    double frequency{5};       // whether 2.4, 5 or 6 GHz
    std::size_t nStations{1};
    std::string dlAckSeqType{"NO-OFDMA"};
    bool enableUlOfdma{false};
    bool enableBsrp{false};
    int mcs{-1}; // -1 indicates an unset value
    uint32_t payloadSize =
        700; // must fit in the max TX duration when transmitting at MCS 0 over an RU of 26 tones
    std::string phyModel{"Yans"};
    double minExpectedThroughput{0};
    double maxExpectedThroughput{0};
    Time accessReqInterval{0};
 
    CommandLine cmd(__FILE__);
    cmd.AddValue("frequency",
                 "Whether working in the 2.4, 5 or 6 GHz band (other values gets rejected)",
                 frequency);
    cmd.AddValue("distance",
                 "Distance in meters between the station and the access point",
                 distance);
    cmd.AddValue("simulationTime", "Simulation time in seconds", simulationTime);
    cmd.AddValue("udp", "UDP if set to 1, TCP otherwise", udp);
    cmd.AddValue("downlink",
                 "Generate downlink flows if set to 1, uplink flows otherwise",
                 downlink);
    cmd.AddValue("useRts", "Enable/disable RTS/CTS", useRts);
    cmd.AddValue("useExtendedBlockAck", "Enable/disable use of extended BACK", useExtendedBlockAck);
    cmd.AddValue("nStations", "Number of non-AP HE stations", nStations);
    cmd.AddValue("dlAckType",
                 "Ack sequence type for DL OFDMA (NO-OFDMA, ACK-SU-FORMAT, MU-BAR, AGGR-MU-BAR)",
                 dlAckSeqType);
    cmd.AddValue("enableUlOfdma",
                 "Enable UL OFDMA (useful if DL OFDMA is enabled and TCP is used)",
                 enableUlOfdma);
    cmd.AddValue("enableBsrp",
                 "Enable BSRP (useful if DL and UL OFDMA are enabled and TCP is used)",
                 enableBsrp);
    cmd.AddValue(
        "muSchedAccessReqInterval",
        "Duration of the interval between two requests for channel access made by the MU scheduler",
        accessReqInterval);
    cmd.AddValue("mcs", "if set, limit testing to a specific MCS (0-11)", mcs);
    cmd.AddValue("payloadSize", "The application payload size in bytes", payloadSize);
    cmd.AddValue("phyModel",
                 "PHY model to use when OFDMA is disabled (Yans or Spectrum). If OFDMA is enabled "
                 "then Spectrum is automatically selected",
                 phyModel);
    cmd.AddValue("minExpectedThroughput",
                 "if set, simulation fails if the lowest throughput is below this value",
                 minExpectedThroughput);
    cmd.AddValue("maxExpectedThroughput",
                 "if set, simulation fails if the highest throughput is above this value",
                 maxExpectedThroughput);
    cmd.Parse(argc, argv);
 
    if (useRts)
    {
        Config::SetDefault("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue("0"));
        Config::SetDefault("ns3::WifiDefaultProtectionManager::EnableMuRts", BooleanValue(true));
    }
 
    if (dlAckSeqType == "ACK-SU-FORMAT")
    {
        Config::SetDefault("ns3::WifiDefaultAckManager::DlMuAckSequenceType",
                           EnumValue(WifiAcknowledgment::DL_MU_BAR_BA_SEQUENCE));
    }
    else if (dlAckSeqType == "MU-BAR")
    {
        Config::SetDefault("ns3::WifiDefaultAckManager::DlMuAckSequenceType",
                           EnumValue(WifiAcknowledgment::DL_MU_TF_MU_BAR));
    }
    else if (dlAckSeqType == "AGGR-MU-BAR")
    {
        Config::SetDefault("ns3::WifiDefaultAckManager::DlMuAckSequenceType",
                           EnumValue(WifiAcknowledgment::DL_MU_AGGREGATE_TF));
    }
    else if (dlAckSeqType != "NO-OFDMA")
    {
        NS_ABORT_MSG("Invalid DL ack sequence type (must be NO-OFDMA, ACK-SU-FORMAT, MU-BAR or "
                     "AGGR-MU-BAR)");
    }
 
    if (phyModel != "Yans" && phyModel != "Spectrum")
    {
        NS_ABORT_MSG("Invalid PHY model (must be Yans or Spectrum)");
    }
    if (dlAckSeqType != "NO-OFDMA")
    {
        // SpectrumWifiPhy is required for OFDMA
        phyModel = "Spectrum";
    }
 
    double prevThroughput[12];
    for (uint32_t l = 0; l < 12; l++)
    {
        prevThroughput[l] = 0;
    }
    std::cout << "MCS value"
              << "\t\t"
              << "Channel width"
              << "\t\t"
              << "GI"
              << "\t\t\t"
              << "Throughput" << '\n';
    int minMcs = 0;
    int maxMcs = 11;
    if (mcs >= 0 && mcs <= 11)
    {
        minMcs = mcs;
        maxMcs = mcs;
    }
    for (int mcs = minMcs; mcs <= maxMcs; mcs++)
    {
        uint8_t index = 0;
        double previous = 0;
        uint8_t maxChannelWidth = frequency == 2.4 ? 40 : 160;
        for (int channelWidth = 20; channelWidth <= maxChannelWidth;) // MHz
        {
            for (int gi = 3200; gi >= 800;) // Nanoseconds
            {
                if (!udp)
                {
                    Config::SetDefault("ns3::TcpSocket::SegmentSize", UintegerValue(payloadSize));
                }
 
                NodeContainer wifiStaNodes;
                wifiStaNodes.Create(nStations);
                NodeContainer wifiApNode;
                wifiApNode.Create(1);
 
                NetDeviceContainer apDevice;
                NetDeviceContainer staDevices;
                WifiMacHelper mac;
                WifiHelper wifi;
                std::string channelStr("{0, " + std::to_string(channelWidth) + ", ");
                StringValue ctrlRate;
                auto nonHtRefRateMbps = HePhy::GetNonHtReferenceRate(mcs) / 1e6;
 
                std::ostringstream ossDataMode;
                ossDataMode << "HeMcs" << mcs;
 
                if (frequency == 6)
                {
                    wifi.SetStandard(WIFI_STANDARD_80211ax);
                    ctrlRate = StringValue(ossDataMode.str());
                    channelStr += "BAND_6GHZ, 0}";
                    Config::SetDefault("ns3::LogDistancePropagationLossModel::ReferenceLoss",
                                       DoubleValue(48));
                }
                else if (frequency == 5)
                {
                    wifi.SetStandard(WIFI_STANDARD_80211ax);
                    std::ostringstream ossControlMode;
                    ossControlMode << "OfdmRate" << nonHtRefRateMbps << "Mbps";
                    ctrlRate = StringValue(ossControlMode.str());
                    channelStr += "BAND_5GHZ, 0}";
                }
                else if (frequency == 2.4)
                {
                    wifi.SetStandard(WIFI_STANDARD_80211ax);
                    std::ostringstream ossControlMode;
                    ossControlMode << "ErpOfdmRate" << nonHtRefRateMbps << "Mbps";
                    ctrlRate = StringValue(ossControlMode.str());
                    channelStr += "BAND_2_4GHZ, 0}";
                    Config::SetDefault("ns3::LogDistancePropagationLossModel::ReferenceLoss",
                                       DoubleValue(40));
                }
                else
                {
                    std::cout << "Wrong frequency value!" << std::endl;
                    return 0;
                }
 
                wifi.SetRemoteStationManager("ns3::ConstantRateWifiManager",
                                             "DataMode",
                                             StringValue(ossDataMode.str()),
                                             "ControlMode",
                                             ctrlRate);
                // Set guard interval and MPDU buffer size
                wifi.ConfigHeOptions("GuardInterval",
                                     TimeValue(NanoSeconds(gi)),
                                     "MpduBufferSize",
                                     UintegerValue(useExtendedBlockAck ? 256 : 64));
 
                Ssid ssid = Ssid("ns3-80211ax");
 
                if (phyModel == "Spectrum")
                {
                    /*
                     * SingleModelSpectrumChannel cannot be used with 802.11ax because two
                     * spectrum models are required: one with 78.125 kHz bands for HE PPDUs
                     * and one with 312.5 kHz bands for, e.g., non-HT PPDUs (for more details,
                     * see issue #408 (CLOSED))
                     */
                    Ptr<MultiModelSpectrumChannel> spectrumChannel =
                        CreateObject<MultiModelSpectrumChannel>();
 
                    Ptr<LogDistancePropagationLossModel> lossModel =
                        CreateObject<LogDistancePropagationLossModel>();
                    spectrumChannel->AddPropagationLossModel(lossModel);
 
                    SpectrumWifiPhyHelper phy;
                    phy.SetPcapDataLinkType(WifiPhyHelper::DLT_IEEE802_11_RADIO);
                    phy.SetChannel(spectrumChannel);
 
                    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
                    phy.Set("ChannelSettings", StringValue(channelStr));
                    staDevices = wifi.Install(phy, mac, wifiStaNodes);
 
                    if (dlAckSeqType != "NO-OFDMA")
                    {
                        mac.SetMultiUserScheduler("ns3::RrMultiUserScheduler",
                                                  "EnableUlOfdma",
                                                  BooleanValue(enableUlOfdma),
                                                  "EnableBsrp",
                                                  BooleanValue(enableBsrp),
                                                  "AccessReqInterval",
                                                  TimeValue(accessReqInterval));
                    }
                    mac.SetType("ns3::ApWifiMac",
                                "EnableBeaconJitter",
                                BooleanValue(false),
                                "Ssid",
                                SsidValue(ssid));
                    apDevice = wifi.Install(phy, mac, wifiApNode);
                }
                else
                {
                    YansWifiChannelHelper channel = YansWifiChannelHelper::Default();
                    YansWifiPhyHelper phy;
                    phy.SetPcapDataLinkType(WifiPhyHelper::DLT_IEEE802_11_RADIO);
                    phy.SetChannel(channel.Create());
 
                    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
                    phy.Set("ChannelSettings", StringValue(channelStr));
                    staDevices = wifi.Install(phy, mac, wifiStaNodes);
 
                    mac.SetType("ns3::ApWifiMac",
                                "EnableBeaconJitter",
                                BooleanValue(false),
                                "Ssid",
                                SsidValue(ssid));
                    apDevice = wifi.Install(phy, mac, wifiApNode);
                }
 
                RngSeedManager::SetSeed(1);
                RngSeedManager::SetRun(1);
                int64_t streamNumber = 150;
                streamNumber += wifi.AssignStreams(apDevice, streamNumber);
                streamNumber += wifi.AssignStreams(staDevices, streamNumber);
 
                // mobility.
                MobilityHelper mobility;
                Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator>();
 
                positionAlloc->Add(Vector(0.0, 0.0, 0.0));
                positionAlloc->Add(Vector(distance, 0.0, 0.0));
                mobility.SetPositionAllocator(positionAlloc);
 
                mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
 
                mobility.Install(wifiApNode);
                mobility.Install(wifiStaNodes);
 
                /* Internet stack*/
                InternetStackHelper stack;
                stack.Install(wifiApNode);
                stack.Install(wifiStaNodes);
 
                Ipv4AddressHelper address;
                address.SetBase("192.168.1.0", "255.255.255.0");
                Ipv4InterfaceContainer staNodeInterfaces;
                Ipv4InterfaceContainer apNodeInterface;
 
                staNodeInterfaces = address.Assign(staDevices);
                apNodeInterface = address.Assign(apDevice);
 
                /* Setting applications */
                ApplicationContainer serverApp;
                auto serverNodes = downlink ? std::ref(wifiStaNodes) : std::ref(wifiApNode);
                Ipv4InterfaceContainer serverInterfaces;
                NodeContainer clientNodes;
                for (std::size_t i = 0; i < nStations; i++)
                {
                    serverInterfaces.Add(downlink ? staNodeInterfaces.Get(i)
                                                  : apNodeInterface.Get(0));
                    clientNodes.Add(downlink ? wifiApNode.Get(0) : wifiStaNodes.Get(i));
                }
 
                if (udp)
                {
                    // UDP flow
                    uint16_t port = 9;
                    UdpServerHelper server(port);
                    serverApp = server.Install(serverNodes.get());
                    serverApp.Start(Seconds(0.0));
                    serverApp.Stop(Seconds(simulationTime + 1));
 
                    for (std::size_t i = 0; i < nStations; i++)
                    {
                        UdpClientHelper client(serverInterfaces.GetAddress(i), port);
                        client.SetAttribute("MaxPackets", UintegerValue(4294967295U));
                        client.SetAttribute("Interval", TimeValue(Time("0.00001"))); // packets/s
                        client.SetAttribute("PacketSize", UintegerValue(payloadSize));
                        ApplicationContainer clientApp = client.Install(clientNodes.Get(i));
                        clientApp.Start(Seconds(1.0));
                        clientApp.Stop(Seconds(simulationTime + 1));
                    }
                }
                else
                {
                    // TCP flow
                    uint16_t port = 50000;
                    Address localAddress(InetSocketAddress(Ipv4Address::GetAny(), port));
                    PacketSinkHelper packetSinkHelper("ns3::TcpSocketFactory", localAddress);
                    serverApp = packetSinkHelper.Install(serverNodes.get());
                    serverApp.Start(Seconds(0.0));
                    serverApp.Stop(Seconds(simulationTime + 1));
 
                    for (std::size_t i = 0; i < nStations; i++)
                    {
                        OnOffHelper onoff("ns3::TcpSocketFactory", Ipv4Address::GetAny());
                        onoff.SetAttribute("OnTime",
                                           StringValue("ns3::ConstantRandomVariable[Constant=1]"));
                        onoff.SetAttribute("OffTime",
                                           StringValue("ns3::ConstantRandomVariable[Constant=0]"));
                        onoff.SetAttribute("PacketSize", UintegerValue(payloadSize));
                        onoff.SetAttribute("DataRate", DataRateValue(1000000000)); // bit/s
                        AddressValue remoteAddress(
                            InetSocketAddress(serverInterfaces.GetAddress(i), port));
                        onoff.SetAttribute("Remote", remoteAddress);
                        ApplicationContainer clientApp = onoff.Install(clientNodes.Get(i));
                        clientApp.Start(Seconds(1.0));
                        clientApp.Stop(Seconds(simulationTime + 1));
                    }
                }
 
                Simulator::Schedule(Seconds(0), &Ipv4GlobalRoutingHelper::PopulateRoutingTables);
 
                Simulator::Stop(Seconds(simulationTime + 1));
                Simulator::Run();
 
                // When multiple stations are used, there are chances that association requests
                // collide and hence the throughput may be lower than expected. Therefore, we relax
                // the check that the throughput cannot decrease by introducing a scaling factor (or
                // tolerance)
                double tolerance = 0.10;
                uint64_t rxBytes = 0;
                if (udp)
                {
                    for (uint32_t i = 0; i < serverApp.GetN(); i++)
                    {
                        rxBytes +=
                            payloadSize * DynamicCast<UdpServer>(serverApp.Get(i))->GetReceived();
                    }
                }
                else
                {
                    for (uint32_t i = 0; i < serverApp.GetN(); i++)
                    {
                        rxBytes += DynamicCast<PacketSink>(serverApp.Get(i))->GetTotalRx();
                    }
                }
                double throughput = (rxBytes * 8) / (simulationTime * 1000000.0); // Mbit/s
 
                Simulator::Destroy();
 
                std::cout << mcs << "\t\t\t" << channelWidth << " MHz\t\t\t" << gi << " ns\t\t\t"
                          << throughput << " Mbit/s" << std::endl;
 
                // test first element
                if (mcs == 0 && channelWidth == 20 && gi == 3200)
                {
                    if (throughput * (1 + tolerance) < minExpectedThroughput)
                    {
                        NS_LOG_ERROR("Obtained throughput " << throughput << " is not expected!");
                        exit(1);
                    }
                }
                // test last element
                if (mcs == 11 && channelWidth == 160 && gi == 800)
                {
                    if (maxExpectedThroughput > 0 &&
                        throughput > maxExpectedThroughput * (1 + tolerance))
                    {
                        NS_LOG_ERROR("Obtained throughput " << throughput << " is not expected!");
                        exit(1);
                    }
                }
                // Skip comparisons with previous cases if more than one stations are present
                // because, e.g., random collisions in the establishment of Block Ack agreements
                // have an impact on throughput
                if (nStations == 1)
                {
                    // test previous throughput is smaller (for the same mcs)
                    if (throughput * (1 + tolerance) > previous)
                    {
                        previous = throughput;
                    }
                    else if (throughput > 0)
                    {
                        NS_LOG_ERROR("Obtained throughput " << throughput << " is not expected!");
                        exit(1);
                    }
                    // test previous throughput is smaller (for the same channel width and GI)
                    if (throughput * (1 + tolerance) > prevThroughput[index])
                    {
                        prevThroughput[index] = throughput;
                    }
                    else if (throughput > 0)
                    {
                        NS_LOG_ERROR("Obtained throughput " << throughput << " is not expected!");
                        exit(1);
                    }
                }
                index++;
                gi /= 2;
            }
            channelWidth *= 2;
        }
    }
    return 0;
}