A Discrete-Event Network Simulator
API
wifi-ht-network.cc
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2009 MIRKO BANCHI
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation;
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11  * GNU General Public License for more details.
12  *
13  * You should have received a copy of the GNU General Public License
14  * along with this program; if not, write to the Free Software
15  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
16  *
17  * Authors: Mirko Banchi <mk.banchi@gmail.com>
18  * Sebastien Deronne <sebastien.deronne@gmail.com>
19  */
20 
21 #include "ns3/boolean.h"
22 #include "ns3/command-line.h"
23 #include "ns3/config.h"
24 #include "ns3/double.h"
25 #include "ns3/enum.h"
26 #include "ns3/ht-phy.h"
27 #include "ns3/internet-stack-helper.h"
28 #include "ns3/ipv4-address-helper.h"
29 #include "ns3/ipv4-global-routing-helper.h"
30 #include "ns3/log.h"
31 #include "ns3/mobility-helper.h"
32 #include "ns3/on-off-helper.h"
33 #include "ns3/packet-sink-helper.h"
34 #include "ns3/packet-sink.h"
35 #include "ns3/ssid.h"
36 #include "ns3/string.h"
37 #include "ns3/tuple.h"
38 #include "ns3/udp-client-server-helper.h"
39 #include "ns3/uinteger.h"
40 #include "ns3/yans-wifi-channel.h"
41 #include "ns3/yans-wifi-helper.h"
42 
43 // This is a simple example in order to show how to configure an IEEE 802.11n Wi-Fi network.
44 //
45 // It outputs the UDP or TCP goodput for every HT MCS value, which depends on the MCS value (0 to
46 // 7), the channel width (20 or 40 MHz) and the guard interval (long or short). The PHY bitrate is
47 // constant over all the simulation run. The user can also specify the distance between the access
48 // point and the station: the larger the distance the smaller the goodput.
49 //
50 // The simulation assumes a single station in an infrastructure network:
51 //
52 // STA AP
53 // * *
54 // | |
55 // n1 n2
56 //
57 // Packets in this simulation belong to BestEffort Access Class (AC_BE).
58 
59 using namespace ns3;
60 
61 NS_LOG_COMPONENT_DEFINE("ht-wifi-network");
62 
63 int
64 main(int argc, char* argv[])
65 {
66  bool udp = true;
67  bool useRts = false;
68  double simulationTime = 10; // seconds
69  double distance = 1.0; // meters
70  double frequency = 5.0; // whether 2.4 or 5.0 GHz
71  int mcs = -1; // -1 indicates an unset value
72  double minExpectedThroughput = 0;
73  double maxExpectedThroughput = 0;
74 
75  CommandLine cmd(__FILE__);
76  cmd.AddValue("frequency",
77  "Whether working in the 2.4 or 5.0 GHz band (other values gets rejected)",
78  frequency);
79  cmd.AddValue("distance",
80  "Distance in meters between the station and the access point",
81  distance);
82  cmd.AddValue("simulationTime", "Simulation time in seconds", simulationTime);
83  cmd.AddValue("udp", "UDP if set to 1, TCP otherwise", udp);
84  cmd.AddValue("useRts", "Enable/disable RTS/CTS", useRts);
85  cmd.AddValue("mcs", "if set, limit testing to a specific MCS (0-7)", mcs);
86  cmd.AddValue("minExpectedThroughput",
87  "if set, simulation fails if the lowest throughput is below this value",
88  minExpectedThroughput);
89  cmd.AddValue("maxExpectedThroughput",
90  "if set, simulation fails if the highest throughput is above this value",
91  maxExpectedThroughput);
92  cmd.Parse(argc, argv);
93 
94  if (useRts)
95  {
96  Config::SetDefault("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue("0"));
97  }
98 
99  double prevThroughput[8];
100  for (uint32_t l = 0; l < 8; l++)
101  {
102  prevThroughput[l] = 0;
103  }
104  std::cout << "MCS value"
105  << "\t\t"
106  << "Channel width"
107  << "\t\t"
108  << "short GI"
109  << "\t\t"
110  << "Throughput" << '\n';
111  int minMcs = 0;
112  int maxMcs = 7;
113  if (mcs >= 0 && mcs <= 7)
114  {
115  minMcs = mcs;
116  maxMcs = mcs;
117  }
118  for (int mcs = minMcs; mcs <= maxMcs; mcs++)
119  {
120  uint8_t index = 0;
121  double previous = 0;
122  for (int channelWidth = 20; channelWidth <= 40;)
123  {
124  for (int sgi = 0; sgi < 2; sgi++)
125  {
126  uint32_t payloadSize; // 1500 byte IP packet
127  if (udp)
128  {
129  payloadSize = 1472; // bytes
130  }
131  else
132  {
133  payloadSize = 1448; // bytes
134  Config::SetDefault("ns3::TcpSocket::SegmentSize", UintegerValue(payloadSize));
135  }
136 
137  NodeContainer wifiStaNode;
138  wifiStaNode.Create(1);
140  wifiApNode.Create(1);
141 
144  phy.SetChannel(channel.Create());
145 
148  std::ostringstream ossControlMode;
149 
150  if (frequency == 5.0)
151  {
152  ossControlMode << "OfdmRate";
153  wifi.SetStandard(WIFI_STANDARD_80211n);
154  }
155  else if (frequency == 2.4)
156  {
157  wifi.SetStandard(WIFI_STANDARD_80211n);
158  ossControlMode << "ErpOfdmRate";
159  Config::SetDefault("ns3::LogDistancePropagationLossModel::ReferenceLoss",
160  DoubleValue(40.046));
161  }
162  else
163  {
164  std::cout << "Wrong frequency value!" << std::endl;
165  return 0;
166  }
167 
168  auto nonHtRefRateMbps = HtPhy::GetNonHtReferenceRate(mcs) / 1e6;
169  ossControlMode << nonHtRefRateMbps << "Mbps";
170 
171  std::ostringstream ossDataMode;
172  ossDataMode << "HtMcs" << mcs;
173  wifi.SetRemoteStationManager("ns3::ConstantRateWifiManager",
174  "DataMode",
175  StringValue(ossDataMode.str()),
176  "ControlMode",
177  StringValue(ossControlMode.str()));
178  // Set guard interval
179  wifi.ConfigHtOptions("ShortGuardIntervalSupported", BooleanValue(sgi));
180 
181  Ssid ssid = Ssid("ns3-80211n");
183  WifiPhyBand band = (frequency == 5.0 ? WIFI_PHY_BAND_5GHZ : WIFI_PHY_BAND_2_4GHZ);
184  channelValue.Set(WifiPhy::ChannelTuple{0, channelWidth, band, 0});
185 
186  mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
187  phy.Set("ChannelSettings", channelValue);
188 
189  NetDeviceContainer staDevice;
190  staDevice = wifi.Install(phy, mac, wifiStaNode);
191 
192  mac.SetType("ns3::ApWifiMac",
193  "EnableBeaconJitter",
194  BooleanValue(false),
195  "Ssid",
196  SsidValue(ssid));
197 
198  NetDeviceContainer apDevice;
199  apDevice = wifi.Install(phy, mac, wifiApNode);
200 
201  // mobility.
203  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator>();
204 
205  positionAlloc->Add(Vector(0.0, 0.0, 0.0));
206  positionAlloc->Add(Vector(distance, 0.0, 0.0));
207  mobility.SetPositionAllocator(positionAlloc);
208 
209  mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
210 
211  mobility.Install(wifiApNode);
212  mobility.Install(wifiStaNode);
213 
214  /* Internet stack*/
216  stack.Install(wifiApNode);
217  stack.Install(wifiStaNode);
218 
220  address.SetBase("192.168.1.0", "255.255.255.0");
221  Ipv4InterfaceContainer staNodeInterface;
222  Ipv4InterfaceContainer apNodeInterface;
223 
224  staNodeInterface = address.Assign(staDevice);
225  apNodeInterface = address.Assign(apDevice);
226 
227  /* Setting applications */
228  ApplicationContainer serverApp;
229  if (udp)
230  {
231  // UDP flow
232  uint16_t port = 9;
233  UdpServerHelper server(port);
234  serverApp = server.Install(wifiStaNode.Get(0));
235  serverApp.Start(Seconds(0.0));
236  serverApp.Stop(Seconds(simulationTime + 1));
237 
238  UdpClientHelper client(staNodeInterface.GetAddress(0), port);
239  client.SetAttribute("MaxPackets", UintegerValue(4294967295U));
240  client.SetAttribute("Interval", TimeValue(Time("0.00001"))); // packets/s
241  client.SetAttribute("PacketSize", UintegerValue(payloadSize));
242  ApplicationContainer clientApp = client.Install(wifiApNode.Get(0));
243  clientApp.Start(Seconds(1.0));
244  clientApp.Stop(Seconds(simulationTime + 1));
245  }
246  else
247  {
248  // TCP flow
249  uint16_t port = 50000;
251  PacketSinkHelper packetSinkHelper("ns3::TcpSocketFactory", localAddress);
252  serverApp = packetSinkHelper.Install(wifiStaNode.Get(0));
253  serverApp.Start(Seconds(0.0));
254  serverApp.Stop(Seconds(simulationTime + 1));
255 
256  OnOffHelper onoff("ns3::TcpSocketFactory", Ipv4Address::GetAny());
257  onoff.SetAttribute("OnTime",
258  StringValue("ns3::ConstantRandomVariable[Constant=1]"));
259  onoff.SetAttribute("OffTime",
260  StringValue("ns3::ConstantRandomVariable[Constant=0]"));
261  onoff.SetAttribute("PacketSize", UintegerValue(payloadSize));
262  onoff.SetAttribute("DataRate", DataRateValue(200000000)); // bit/s
263  AddressValue remoteAddress(
264  InetSocketAddress(staNodeInterface.GetAddress(0), port));
265  onoff.SetAttribute("Remote", remoteAddress);
266  ApplicationContainer clientApp = onoff.Install(wifiApNode.Get(0));
267  clientApp.Start(Seconds(1.0));
268  clientApp.Stop(Seconds(simulationTime + 1));
269  }
270 
272 
273  Simulator::Stop(Seconds(simulationTime + 1));
274  Simulator::Run();
275 
276  uint64_t rxBytes = 0;
277  if (udp)
278  {
279  rxBytes = payloadSize * DynamicCast<UdpServer>(serverApp.Get(0))->GetReceived();
280  }
281  else
282  {
283  rxBytes = DynamicCast<PacketSink>(serverApp.Get(0))->GetTotalRx();
284  }
285  double throughput = (rxBytes * 8) / (simulationTime * 1000000.0); // Mbit/s
286 
288 
289  std::cout << mcs << "\t\t\t" << channelWidth << " MHz\t\t\t" << sgi << "\t\t\t"
290  << throughput << " Mbit/s" << std::endl;
291 
292  // test first element
293  if (mcs == 0 && channelWidth == 20 && sgi == 0)
294  {
295  if (throughput < minExpectedThroughput)
296  {
297  NS_FATAL_ERROR("Obtained throughput " << throughput << " is not expected!");
298  }
299  }
300  // test last element
301  if (mcs == 7 && channelWidth == 40 && sgi == 1)
302  {
303  if (maxExpectedThroughput > 0 && throughput > maxExpectedThroughput)
304  {
305  NS_FATAL_ERROR("Obtained throughput " << throughput << " is not expected!");
306  }
307  }
308  // test previous throughput is smaller (for the same mcs)
309  if (throughput > previous)
310  {
311  previous = throughput;
312  }
313  else
314  {
315  NS_FATAL_ERROR("Obtained throughput " << throughput << " is not expected!");
316  }
317  // test previous throughput is smaller (for the same channel width and GI)
318  if (throughput > prevThroughput[index])
319  {
320  prevThroughput[index] = throughput;
321  }
322  else
323  {
324  NS_FATAL_ERROR("Obtained throughput " << throughput << " is not expected!");
325  }
326  index++;
327  }
328  channelWidth *= 2;
329  }
330  }
331  return 0;
332 }
a polymophic address class
Definition: address.h:100
AttributeValue implementation for Address.
holds a vector of ns3::Application pointers.
void Start(Time start) const
Start all of the Applications in this container at the start time given as a parameter.
Ptr< Application > Get(uint32_t i) const
Get the Ptr<Application> stored in this container at a given index.
void Stop(Time stop) const
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter.
AttributeValue implementation for Boolean.
Definition: boolean.h:37
Parse command-line arguments.
Definition: command-line.h:232
AttributeValue implementation for DataRate.
This class can be used to hold variables of floating point type such as 'double' or 'float'.
Definition: double.h:42
static uint64_t GetNonHtReferenceRate(uint8_t mcsValue)
Calculate the rate in bps of the non-HT Reference Rate corresponding to the supplied HT MCS index.
Definition: ht-phy.cc:732
an Inet address class
aggregate IP/TCP/UDP functionality to existing Nodes.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
static Ipv4Address GetAny()
static void PopulateRoutingTables()
Build a routing database and initialize the routing tables of the nodes in the simulation.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
Helper class used to assign positions and mobility models to nodes.
holds a vector of ns3::NetDevice pointers
keep track of a set of node pointers.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes.
Definition: on-off-helper.h:44
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes.
Smart pointer class similar to boost::intrusive_ptr.
Definition: ptr.h:78
static void Destroy()
Execute the events scheduled with ScheduleDestroy().
Definition: simulator.cc:140
static void Run()
Run the simulation.
Definition: simulator.cc:176
static void Stop()
Tell the Simulator the calling event should be the last one executed.
Definition: simulator.cc:184
The IEEE 802.11 SSID Information Element.
Definition: ssid.h:36
AttributeValue implementation for Ssid.
Hold variables of type string.
Definition: string.h:56
AttributeValue implementation for Time.
Definition: nstime.h:1423
Hold objects of type std::tuple<Args...>.
Definition: tuple.h:69
void Set(const result_type &value)
Set the stored values.
Definition: tuple.h:318
Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit tim...
Create a server application which waits for input UDP packets and uses the information carried into t...
Hold an unsigned integer type.
Definition: uinteger.h:45
helps to create WifiNetDevice objects
Definition: wifi-helper.h:325
create MAC layers for a ns3::WifiNetDevice.
std::tuple< uint8_t, uint16_t, int, uint8_t > ChannelTuple
Tuple identifying an operating channel.
Definition: wifi-phy.h:870
manage and create wifi channel objects for the YANS model.
static YansWifiChannelHelper Default()
Create a channel helper in a default working state.
Make it easy to create and manage PHY objects for the YANS model.
uint16_t port
Definition: dsdv-manet.cc:45
void SetDefault(std::string name, const AttributeValue &value)
Definition: config.cc:891
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
Definition: fatal-error.h:179
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
Definition: log.h:202
Time Seconds(double value)
Construct a Time in the indicated unit.
Definition: nstime.h:1336
WifiPhyBand
Identifies the PHY band.
Definition: wifi-phy-band.h:33
@ WIFI_STANDARD_80211n
@ WIFI_PHY_BAND_2_4GHZ
The 2.4 GHz band.
Definition: wifi-phy-band.h:35
@ WIFI_PHY_BAND_5GHZ
The 5 GHz band.
Definition: wifi-phy-band.h:37
address
Definition: first.py:40
stack
Definition: first.py:37
void(* Time)(Time oldValue, Time newValue)
TracedValue callback signature for Time.
Definition: nstime.h:848
Every class exported by the ns3 library is enclosed in the ns3 namespace.
cmd
Definition: second.py:33
ssid
Definition: third.py:86
channel
Definition: third.py:81
mac
Definition: third.py:85
wifi
Definition: third.py:88
wifiApNode
Definition: third.py:79
mobility
Definition: third.py:96
phy
Definition: third.py:82